Rohde & Schwarz R&S SMB100B - VISA Resource Strings

Network operation and remote control
R&S
®
SMB100B
290User Manual 1178.3711.02 ─ 08
11.5.2 VISA resource strings
Access:
► Select "System Config > Remote Access > Visa Resource Strings".
The "Visa Resource String" dialog displays the VISA resource strings provided for
remote control over the different interfaces.
The remote commands required to query the address information remotely are descri-
bed in Chapter 12.16, "SYSTem subsystem", on page 517.
Settings
HISLIP.........................................................................................................................290
VXI11...........................................................................................................................290
Socket......................................................................................................................... 291
GPIB............................................................................................................................291
USB.............................................................................................................................291
SERIAL....................................................................................................................... 291
HISLIP
Displays the visa resource string for remote control with HiSLIP protocol.
See also Chapter 11.2.1, "LAN interface", on page 269
Remote command:
:SYSTem:COMMunicate:HISLip:RESource? on page 529
VXI11
Displays the visa resource string for remote control over LAN.
See also Chapter 11.2.1, "LAN interface", on page 269
Remote access settings