Rohde & Schwarz R&S SMB100B - LXI Browser Settings

Network operation and remote control
R&S
®
SMB100B
308User Manual 1178.3711.02 ─ 08
"red"
LAN fault
Hostname / MAC Address / IP Address
See "Hostname" on page 287.
LAN Reset
Initiates the network configuration reset mechanism for the instrument and resets the
hostname, MAC address, and IP address.
According to the LXI standard, a LAN reset must set the following network parameters
to a default state:
Parameter Value
TCP/IP mode DHCP + Auto IP address
Dynamic DNS Enabled
ICMP ping Enabled
Password for LAN configuration LxiWebIfc
The LAN reset also resets the following parameters for the RF signal generator:
Parameter
Hostname
Instrument-specific hostname
Description Vector signal generator
Negotiation Auto detect
VXI-11 discovery Enabled
11.6.2 LXI browser settings
The LXI browser functionality enables you to control the instrument remotely over a
web browser.
Access:
► In the address field of the browser, enter the URL address, composed of the instru-
ment's IP address or host name, for example http://10.113.1.151.
Note: Do not add the missing zeros in the IP address, while opening the instru-
ment homepage.
LXI settings