Rohde & Schwarz R&S SMB100B - Active Connections; Remote Connections Settings

Network operation and remote control
R&S
®
SMB100B
294User Manual 1178.3711.02 ─ 08
Set to Default
In "Mode > User Defined", resets the *IDN and *OPT strings.
Remote command:
:SYSTem:IDENtification:PRESet on page 534
IDN String
Indicates the identification string of the instrument when queried with the common
command *IDN?.
In addition to the preset values, you can define your own identification string so that
each generator uses an individual identification, like My_SigGen for instance, see
Mode .
Remote command:
*IDN? on page 352
:SYSTem:IRESponse on page 534
OPT String
Indicates the option string of the instrument as queried with common command *OPT?.
In Mode > "User Defined", you can define your own option string. A query responds
with this option string instead of the automatically created option string.
Remote command:
*OPT? on page 353
:SYSTem:ORESponse on page 534
11.5.6 Remote connections settings
The "Remote Connections" dialog covers the active SCPI and TCP/IP connections,
and a history list of the connections that have accessed the instrument before.
11.5.6.1 Active connections
Access:
► Select "System Config > Remote Access > Remote Connections > Active".
Remote access settings