Rohde & Schwarz R&S SMB100B - HUMS Enhanced Settings

Network operation and remote control
R&S
®
SMB100B
298User Manual 1178.3711.02 ─ 08
Delete History
Deletes all information from the HUMS service including the device history.
Note: Regarding the instrument security, the sanitization procedure also deletes the
history of the HUMS service, see Chapter 10.4.2.2, "Disk & memory security settings",
on page 251.
Remote command:
DIAGnostic:HUMS:DEVice:HISTory:DELete:ALL on page 376
Export History
Triggers an export of the logged data of the HUMS service into a *.zip file.
A standard file dialog opens, to save the log file. By default, the file is saved to the
directory /var/user/.
Remote command:
DIAGnostic:HUMS:DEVice:HISTory? on page 375
DIAGnostic:HUMS:SAVE on page 376
11.5.8 HUMS enhanced settings
Access:
1. Select "System Config > Remote Access > HUMS".
2. Select "State > ON".
3. Select "Enhanced Settings".
The dialog provides enhanced settings for configuring protocol settings and device
tags.
The remote commands required to define these settings are described in Chapter 12.8,
"HUMS remote control commands", on page 374.
Remote access settings