Rohde & Schwarz R&S SMB100B - Display Update Settings

General instrument functions
R&S
®
SMB100B
229User Manual 1178.3711.02 ─ 08
Screen Saver
Activates the screensaver.
If activated, the display including backlight is switched off after the selected Wait Time
elapses and if no entries via touch panel, front panel, external mouse, or external key-
board are made
Remote command:
:DISPlay:PSAVe[:STATe] on page 383
Wait Time
Enters the idle time that must elapse before the display lamp is shut off when no
entries are made.
Remote command:
:DISPlay:PSAVe:HOLDoff on page 383
Display
Adjusts the brightness of the display.
Increase the value to turn up the display brightness.
Remote command:
:DISPlay:BRIGhtness on page 383
RF Hardkey
Adjusts the brightness of the [RF on/off] key.
Increase the value to change the contrast between the key and the front panel back-
ground color.
Remote command:
:DISPlay:BUTTon:BRIGhtness on page 384
USB Keyboard > Layout
Selects the language of an externally connected keyboard via USB. The function
assigns the corresponding keys automatically.
Remote command:
:KBOard:LAYout on page 393
10.1.2 Display update settings
Access:
► Select "System Config > Setup > User Interface > Start/Stop Display Update".
Customizing the user interface