Rohde & Schwarz R&S SMB100B - Page 384

Remote control commands
R&S
®
SMB100B
384User Manual 1178.3711.02 ─ 08
:DISPlay:BUTTon:BRIGhtness <ButtonBrightnes>
Sets the brightness of the [RF on/off] key.
Parameters:
<ButtonBrightnes> integer
Range: 1 to 20
*RST: n.a. (no preset. default: 14)
Example:
DISPlay:BUTTon:BRIGhtness 15
Manual operation: See "RF Hardkey" on page 229
:DISPlay:UPDate[:STATe]
<Update>
Activates the refresh mode of the display.
Parameters:
<Update> 1 | ON | 0 | OFF
*RST: n.a. (factory preset: 1)
Example: See Example"Activating screen saver mode and display update"
on page 382
Manual operation: See "Display Update is" on page 230
:DISPlay:ANNotation:AMPLitude <State>
Indicates asterisks instead of the level values in the status bar.
Parameters:
<State> 1 | ON | 0 | OFF
*RST: n.a. (factory preset: 1)
Example: See Example"Activating screen saver mode and display update"
on page 382
Manual operation: See "Annotation Amplitude" on page 253
:DISPlay:ANNotation:FREQuency <State>
Indicates asterisks instead of the frequency values in the status bar.
Parameters:
<State> 1 | ON | 0 | OFF
*RST: n.a. (factory preset: 1)
Example: See Example"Activating screen saver mode and display update"
on page 382
Manual operation: See "Annotation Frequency" on page 253
DISPlay subsystem