Network operation and remote control
R&S
®
SMB100B
286User Manual 1178.3711.02 ─ 08
REST endpoint
/api/hums/v1/...
SNMP MIB Description Typical data
documents --- developer information SNMP MIB files, swagger specification of
HUMS REST endpoints
greetings RS-GREETINGS-MIB identity information manufacturer, model, serial number, version
equipment/bios RS-BIOS-INFO-MIB BIOS information BIOS manufacturer, version and release date
date-time RS-TIME-DATE-MIB time and date information UTC and local time, timezone, dst (daylight
savings time)
device-history RS-DEVICE-HISTORY-MIB history events instrument-specific event information and noti-
fications
device-tags RS-DEVICE-TAGS-MIB customer information user-definable key information, associated
with the instrument, e.g. asset number, owner,
location
equipment RS-EQUIPMENT-MIB footprint information hardware and software configuration, licenses
hums-info RS-HUMS-INFO-MIB basic information on the
HUMS service
HUMS version, counter of SNMP and REST
requests, amount of collected data, HUMS
database size
storage RS-STORAGE-MIB S.M.A.R.T. data of drive system drive temperature, drive health
system-info RS-SYSTEM-INFO-MIB a system overview OS and BIOS version, IP address, locale
system-status RS-SYSTEM-STATUS-MIB system status information global system status, static notifications
utilization RS-UTILIZATION-MIB utilization information instrument activity, e.g., power on time, RF on
time, option utilization, remote interface traffic
For detailed information about HUMS and its applications, refer to:
●
The R&S
®
HUMS Health and Utilization Monitoring Service user manual, available
on the Rohde & Schwarz website.
●
The application note GFM336: Instrument Health and Utilization Monitoring
11.5.1 Network settings
Access:
► Select "System Config > Remote Access > Network".
Remote access settings
To Next Page
Loading...
