Rohde & Schwarz R&S SMB100B - Automatic Naming

Remote control commands
R&S
®
SMB100B
390User Manual 1178.3711.02 ─ 08
:HCOPy:REGion <Region>
Selects the area to be copied.
You can create a snapshot of the screen or an active dialog.
Parameters:
<Region> ALL | DIALog
*RST: ALL
Example: See Example"Store a hard copy of the display" on page 388
Manual operation: See "Region" on page 223
:HCOPy:FILE[:NAME] <Name>
Determines the file name and path to save the hard copy, provided automatic naming
is disabled.
Note: If you have enabled automatic naming, the instrument automatically generates
the file name and directory, see Chapter 12.11.2, "Automatic naming", on page 390.
Parameters:
<Name> string
Example: See Example"Store a hard copy of the display" on page 388
Manual operation: See "File..." on page 222
:HCOPy[:EXECute]
Generates a hard copy of the current display. The output destination is a file.
Example:
See Example"Store a hard copy of the display" on page 388
Usage: Event
Manual operation: See "Save" on page 223
12.11.2 Automatic naming
Use the following commands to automatically assign a file name.
:HCOPy:FILE[:NAME]:AUTO?.........................................................................................391
:HCOPy:FILE[:NAME]:AUTO:DIRectory........................................................................... 391
:HCOPy:FILE[:NAME]:AUTO:DIRectory:CLEar................................................................. 391
:HCOPy:FILE[:NAME]:AUTO:FILE?................................................................................. 391
:HCOPy:FILE[:NAME]:AUTO:STATe.................................................................................392
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe................................................................392
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe...........................................................392
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR:STATe............................................................. 392
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer?..................................................................392
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix..................................................................... 393
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix:STATe........................................................... 393
HCOPy subsystem