Rohde & Schwarz R&S SMB100B - Page 392

Remote control commands
R&S
®
SMB100B
392User Manual 1178.3711.02 ─ 08
:HCOPy:FILE[:NAME]:AUTO:STATe <State>
Activates automatic naming of the hard copy files.
Parameters:
<State> 1 | ON | 0 | OFF
*RST: 1
Example: See Example"Store a hard copy of the display" on page 388
Manual operation: See "Automatic Naming" on page 223
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe
<State>
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe <State>
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR:STATe <State>
Uses the date parameters (year, month or day) for the automatic naming. You can acti-
vate each of the date parameters separately.
Parameters:
<State> 1 | ON | 0 | OFF
*RST: 1
Example: See Example"Store a hard copy of the display" on page 388
Manual operation: See "Prefix, Year, Month, Day" on page 224
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer?
Queries the number that is used as part of the file name for the next hard copy in auto-
matic mode.
At the beginning, the count starts at 0. The R&S SMB100B searches the specified out-
put directory for the highest number in the stored files. It increases this number by one
to achieve a unique name for the new file.
The resulting auto number is appended to the resulting file name with at least three
digits.
Return values:
<Number> integer
Range: 0 to 999999
*RST: 0
Example: See Example"Store a hard copy of the display" on page 388
Usage: Query only
Manual operation: See "Current Auto Number" on page 225
HCOPy subsystem