Rohde & Schwarz R&S SMB100B - Page 223

File and data management
R&S
®
SMB100B
223User Manual 1178.3711.02 ─ 08
Format
Selects the output file format, for example *.bmp, *.jpg*.xpm and *.png.
Remote command:
:HCOPy:IMAGe:FORMat on page 389
:HCOPy:DEVice:LANGuage on page 389
Options...
Accesses Hardcopy Options dialog.
Save
Saves a hardcopy of the current display as a file.
Remote command:
:HCOPy[:EXECute] on page 390
Hardcopy Options > Common
Access: select "Hardcopy > Options... > Common".
With the provided settings, you can customize the file format and the syntax of the
automatically assigned filename.
Automatic Naming ← Hardcopy Options > Common
If enabled, creates the output filenames automatically according to the rules set with
the Hardcopy Options > Automatic Naming settings.
Remote command:
:HCOPy:FILE[:NAME]:AUTO:STATe on page 392
Format ← Hardcopy Options > Common
Selects the output file format, for example *.bmp, *.jpg*.xpm and *.png.
Remote command:
:HCOPy:IMAGe:FORMat on page 389
:HCOPy:DEVice:LANGuage on page 389
Region ← Hardcopy Options > Common
Displays the snapshot area.
Remote command:
:HCOPy:REGion on page 390
Creating screenshots of current settings