Rohde & Schwarz R&S SMB100B - Shutting down and Rebooting the Instrument

General instrument functions
R&S
®
SMB100B
265User Manual 1178.3711.02 ─ 08
10.6 Shutting down and rebooting the instrument
The [On/Standby] front panel key switches the instrument from the standby to the
ready state or vice versa. In remote operation from a remote computer or in manual
control, there is another possibility to shut down the instrument or to reboot the system.
Access:
► Select "System Config > Setup > Maintenance > Shut Down".
●
:SYSTem:REBoot on page 542
●
:SYSTem:SHUTdown on page 542
Shutting down and rebooting the instrument