Rohde & Schwarz R&S SMB100B - Ari

Analog modulations
R&S
®
SMB100B
83User Manual 1178.3711.02 ─ 08
Pilot State
Activates the pilot tone generation.
Remote command:
[:SOURce]:STEReo:PILot:STATe on page 442
Pilot Deviation
Sets the deviation of the pilot tone.
Remote command:
[:SOURce]:STEReo:PILot[:DEViation] on page 442
Pilot Phase
Sets the phase of the pilot tone in relation to the 38 kHz carrier signal of the receiver.
For a correct demodulation, the pilot tone must be in phase with the 38 kHz carrier.
Remote command:
[:SOURce]:STEReo:PILot:PHASe on page 443
5.4.3.3 ARI
Access:
► Select "Modulation" > "Stereo Modulation > ARI".
ARI (Automotive Radio Information) indicates the presence of traffic information in FM
radio broadcasts.
Settings
ARI State.......................................................................................................................84
ARI Deviation................................................................................................................ 84
ARI Identification...........................................................................................................84
ARI BK.......................................................................................................................... 84
Modulation settings