Rohde & Schwarz R&S SMB100B - Page 442

Remote control commands
R&S
®
SMB100B
442User Manual 1178.3711.02 ─ 08
Parameters:
<Mmf> integer
Range: 1000 to 18000
*RST: 1000
Example: See Example"Activating stereo modulation" on page 438.
Manual operation: See "Max Modulation Frequency" on page 82
[:SOURce]:STEReo:AUDio:PREemphasis <PreEmphasis>
If [:SOURce]:STEReo:AUDio:PREemphasis:STATe1, sets the preemphasis used
for signal generation.
Parameters:
<PreEmphasis> OFF | 50 | 75
Range: 50 us to 75 us
Example: See Example"Activating stereo modulation" on page 438.
Manual operation: See "Preemphasis" on page 81
[:SOURce]:STEReo:AUDio:PREemphasis:STATe <State>
Activates the use of preemphasis for signal generation.
Parameters:
<State> 0 | 1 | OFF | ON
*RST: 0
Example: See Example"Activating stereo modulation" on page 438.
Manual operation: See "Preemphasis" on page 81
[:SOURce]:STEReo:PILot:STATe <State>
Activates/deactivates the pilot tone generation.
Parameters:
<State> 0 | 1 | OFF | ON
*RST: 1
Example: See Example"Activating stereo modulation" on page 438.
Manual operation: See "Pilot State" on page 83
[:SOURce]:STEReo:PILot[:DEViation] <Deviation>
Sets the deviation of the pilot tone.
SOURce subsystem