Rohde & Schwarz R&S SMB100B - General Settings

Analog modulations
R&S
®
SMB100B
79User Manual 1178.3711.02 ─ 08
DUT
1 2 3
4
5
6
Figure 5-1: Example setup
1 = R&S SMB100B with Stereo/RDS Coder R&S SMBB-B5
2 = RF modulated test signal including ARI and RDS
3 = FM stereo tuner
4 = Analog audio signals
5 =
Signal generation and analysis, for example with R&S
®
UPV Audio Analyzer
6 = Analog or digital audio signals
● General settings......................................................................................................79
● Pilot tone................................................................................................................. 82
● ARI.......................................................................................................................... 83
● RDS.........................................................................................................................84
5.4.3.1 General settings
Access:
► Select "Modulation" > "Stereo Modulation".
The "General" tab contains the settings for creating a stereo modulation signal.
Modulation settings