Rohde & Schwarz R&S SMB100B - Correction Data Exchange

Remote control commands
R&S
®
SMB100B
452User Manual 1178.3711.02 ─ 08
Manual operation: See "UCOR Data" on page 160
12.15.2.2 Correction data exchange
With the following commands, you can configure user correction lists and export or
import them accordingly.
[:SOURce<hw>]:CORRection:DEXChange:AFILe:CATalog?
Queries the available ASCII files for export or import of user correction data in the cur-
rent or specified directory.
Return values:
<Catalog> string
List of ASCII files *.txt or *.csv, separated by commas.
Example: See Example"Create a table with user-defined correction values
for the RF level" on page 446 .
Usage: Query only
Manual operation: See "Select (ASCII) Source/Select (ASCII) Destination"
on page 96
[:SOURce<hw>]:CORRection:DEXChange:AFILe:EXTension <Extension>
Determines the extension of the ASCII files for file import or export, or to query existing
files.
Parameters:
<Extension> TXT | CSV
*RST: TXT
Example: See Example"User correction data exchange" on page 448 .
Manual operation: See "ASCII File Settings" on page 95
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SELect <Filename>
Selects the ASCII file to be imported or exported.
Parameters:
<Filename> string
Filename or complete file path; file extension can be omitted.
Example: See Example"User correction data exchange" on page 448 .
Manual operation: See "Select (ASCII) Source/Select (ASCII) Destination"
on page 96
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:COLumn <Column>
Selects the separator between the frequency and level column of the ASCII table.
SOURce subsystem