Rohde & Schwarz R&S SMB100B - Page 95

Analog modulations
R&S
®
SMB100B
95User Manual 1178.3711.02 ─ 08
2. Select "Import/Export".
Figure 5-2: Im-/Export dialog (example with UCOR settings)
The "Import/Export" dialog contains all functions and settings to import externally
created list data or to export it accordingly. You can process and store a list in the
formats *.txt (ASCII), or *.csv (plain text with identical sequence of fields). The
table separators and the decimal floating point numbers are customizable.
Settings
Mode............................................................................................................................. 95
ASCII File Settings........................................................................................................95
Select (ASCII) Source/Select (ASCII) Destination........................................................ 96
Select Source/Select ASCII Destination....................................................................... 96
Import / Export...............................................................................................................96
Mode
Selects import or export of a data list file. The provided parameters vary according to
the selected mode.
Remote command:
[:SOURce<hw>]:LIST:DEXChange:MODE on page 487
[:SOURce<hw>]:CORRection:DEXChange:MODE on page 453
[:SOURce<hw>]:PULM:TRAin:DEXChange:MODE on page 436
ASCII File Settings
Defines the format and the separators of the associated data file.
"Extension"
Selects *.csv or *.txt format.
"Decimal
Point"
Sets "Point" (dot) or "Comma" as the decimal separator used in the
ASCII data with floating-point numerals.
"Column Separator"
Sets the separator between the columns in an ASCII table.
Available are: "Tab", "Semicolon", "Comma" or "Space".
Remote command:
[:SOURce<hw>]:LIST:DEXChange:AFILe:EXTension on page 486
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:DECimal on page 486
Modulation settings