Rohde & Schwarz R&S SMB100B - Page 436

Remote control commands
R&S
®
SMB100B
436User Manual 1178.3711.02 ─ 08
SOURce1:PULM:SOURce INT
SOURce1:PULM:MODE PTR
SOURce1:PULM:TRAin:SELect "/var/user/pt"
SOURce1:PULM:STATe 1
SOURce1:PULM:TRAin:DEXChange:MODE EXP
SOURce1:PULM:TRAin:DEXChange:AFILe:EXTension TXT
SOURce1:PULM:TRAin:DEXChange:AFILe:SEParator:DECimal DOT
SOURce1:PULM:TRAin:DEXChange:AFILe:SEParator:COLumn SEM
SOURce1:PULM:TRAin:DEXChange:AFILe:SEParator:COLumn COMM
SOURce1:PULM:TRAin:DEXChange:SELect "/var/user/pt.pulstrn"
SOURce1:PULM:TRAin:DEXChange:AFILe:SELect "/var/user/pt_script.txt"
SOURce1:PULM:TRAin:DEXChange:EXECute
The following commands are available:
[:SOURce<hw>]:PULM:TRAin:DEXChange:MODE............................................................436
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:EXTension............................................ 436
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:SEParator:DECimal............................... 437
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:SEParator:COLumn...............................437
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:CATalog?..............................................437
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:SELect................................................. 437
[:SOURce<hw>]:PULM:TRAin:DEXChange:SELect...........................................................438
[:SOURce<hw>]:PULM:TRAin:DEXChange:EXECute........................................................438
[:SOURce<hw>]:PULM:TRAin:DEXChange:MODE <Mode>
Determines the import or export of a list.
Specify the source or destination file with the command [:SOURce<hw>]:PULM:
TRAin:DEXChange:SELect.
Parameters:
<Mode> IMPort | EXPort
*RST: IMPort
Example: See "Pulse train data exchange" on page 435.
Manual operation: See "Mode" on page 95
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:EXTension <Extension>
Determines the extension of the ASCII file for import or export, or to query existing
files.
Parameters:
<Extension> TXT | CSV
*RST: TXT
Example: See "Pulse train data exchange" on page 435.
Manual operation: See "ASCII File Settings" on page 95
SOURce subsystem