Rohde & Schwarz R&S SMB100B - Page 437

Remote control commands
R&S
®
SMB100B
437User Manual 1178.3711.02 ─ 08
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:SEParator:DECimal <Decimal>
Sets "." (decimal point) or "," (comma) as the decimal separator used in the ASCII data
with floating-point numerals.
Parameters:
<Decimal> DOT | COMMa
*RST: DOT
Example: See "Pulse train data exchange" on page 435.
Manual operation: See "ASCII File Settings" on page 95
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:SEParator:COLumn <Column>
Selects the separator between the frequency and level column of the ASCII table.
Parameters:
<Column> TABulator | SEMicolon | COMMa | SPACe
*RST: COMMa
Example: See "Pulse train data exchange" on page 435.
Manual operation: See "ASCII File Settings" on page 95
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:CATalog?
Queries the available ASCII files in the current or specified directory.
Return values:
<Catalog> string
List of ASCII files *.txt or *.csv, separated by commas.
Example: See "Pulse train data exchange" on page 435.
Usage: Query only
Manual operation: See "Select (ASCII) Source/Select (ASCII) Destination"
on page 96
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:SELect <Filename>
Selects the ASCII file to be imported or exported.
Parameters:
<Filename> string
Filename or complete file path; file extension can be omitted.
Example: See "Pulse train data exchange" on page 435.
Manual operation: See "Select (ASCII) Source/Select (ASCII) Destination"
on page 96
SOURce subsystem