General instrument functions
R&S
®
SMB100B
257User Manual 1178.3711.02 ─ 08
"SCPI over LAN"
Activates access over LAN to control the instrument remotely, by
using SCPI (Standard Commands for Programmable Instruments)
commands.
See also "To start remote control with R&S VISA" on page 324.
"VNC"
Activates access over VNC (Virtual Network Computing) interface, a
graphical desktop sharing system that uses RFB protocol to control
the instrument remotely.
See also Chapter 11.14, "To operate the instrument using VNC",
on page 340.
"SSH (SCP)"
Activates access over SSH (Secure Shell), a network protocol for
secure data communication.
"Remote Support"
Activates remote support over SSH.
Per default, this service is disabled. It provides communication for
service support purposes only.
"HTTP"
Activates access via HTTP (Hyper Text Transfer Protocol), the appli-
cation protocol for hypermedia information systems.
"FTP"
Activates access over FTP (File Transfer Protocol), used to transfer
files from a host to the instrument and vice versa.
See also Chapter 9.9.2, "Accessing the file system of the
R&S SMB100B over FTP", on page 217.
"SMB (Samba)"
Activates access to SMB (Server Message Block), used for providing
shared access to files, printers and serial ports of a network.
See also Chapter 9.9.3, "Accessing the R&S SMB100B file system
using SMB (Samba)", on page 218.
"Avahi (Zeroconf)"
Activates Avahi, a service for automatic configuration of the instru-
ment in a network environment.
"Software Update"
Allows updating the software.
Samba Services
Activate or deactivate support of SMB client and SMB server version 1.0 and 2.0 of the
SMB protocol.
Support of version 1.0 and 2.0 is additional to the current SMB protocol version sup-
ported in the firmware. This firmware supports SMB protocol versions up to version 4.
SMB 1.0/2.0 Client ← Samba Services
Activates support of the SMB client compatible with SMB protocol versions 1.0 and 2.0.
SMB 1.0/2.0 Server ← Samba Services
Activates support of the SMB server compatible with SMB protocol versions 1.0 and
2.0.
Using the security settings
To Next Page
Loading...
