Rohde & Schwarz R&S SMB100B - Page 261

General instrument functions
R&S
®
SMB100B
261User Manual 1178.3711.02 ─ 08
To prevent unauthorized access, use the following configurations exclusively or com-
plementary:
●
"Changing the default user password of the instrument" on page 261
●
"Changing the default security password" on page 261
●
"Disabling the LAN interface" on page 261
●
"Disabling LAN services" on page 262
●
"Activating SMB version 1.0/2.0 client and server" on page 262
●
"Disabling the frequency and level indication in the status bar" on page 262
●
"Deactivating the user interface" on page 262
If security is a concern, see the document instrument security procedures for compre-
hensive description.
Changing the default user password of the instrument
► Note: We recommend that you change the default password before connecting the
instrument to a network.
How to:
● "Changing the default user password of the instrument" on page 261.
● "Changing the default security password" on page 261.
a) Select "System Config > Setup > Security > Security > Password Management
> User Password".
b) Enter the current password in the "Old Password" field.
c) Enter the new password in the "New Password" and "Confirm Password" fields.
d) Select "Change Password".
The user password is changed; the user name is displayed ("Security > Password
Management > User Password > User Name").
Changing the default security password
► Note: We recommend that you change the default password before connecting the
instrument to a network.
How to:
● "Changing the default user password of the instrument" on page 261.
● "Changing the default security password" on page 261.
a) Select "System Config > Setup > Security > Security > Password Management
> Security Password".
b) Enter the current password in the "Old Password" field.
The default password is 123456.
c) Enter the new password in the "New Password" and "Confirm Password" fields.
d) Select "Change Password".
Disabling the LAN interface
1. Select "System Config > Setup > Security > Security > LAN Services > Main Ser-
vices".
Using the security settings