Rohde & Schwarz R&S SMB100B - Page 366

Remote control commands
R&S
®
SMB100B
366User Manual 1178.3711.02 ─ 08
Setting parameters:
<Directory> string
String parameter to specify the new directory.
Usage: Event
Manual operation: See "Create New Directory" on page 211
:MMEMory:MOVE <SourceFile>, <DestinationFile>
Moves an existing file to a new location or, if no path is specified, renames an existing
file.
Setting parameters:
<SourceFile> string
String parameter to specify the name of the file to be moved.
<DestinationFile> string
String parameters to specify the name of the new file.
Usage: Event
SCPI confirmed
Manual operation: See "Rename " on page 211
:MMEMory:MSIS <Msis>
Defines the drive or network resource (in the case of networks) for instruments with
windows operating system, using msis (MSIS = Mass Storage Identification String).
Note: Instruments with Linux operating system ignore this command, since Linux does
not use drive letter assignment.
Usage:
SCPI confirmed
:MMEMory:RDIRectory <Directory>
Removes an existing directory from the mass memory storage system. If no directory
is specified, the subdirectory with the specified name is deleted in the default directory.
Setting parameters:
<Directory> string
String parameter to specify the directory to be deleted.
Usage: Event
:MMEMory:STORe:STATe <savrcl_state_nr>, <file_name>
Stores the current instrument setting in the specified file.
The instrument setting must first be stored in an internal memory with the same num-
ber using the common command *SAV.
MMEMory subsystem