Rohde & Schwarz R&S SMB100B - Page 365

Remote control commands
R&S
®
SMB100B
365User Manual 1178.3711.02 ─ 08
:MMEMory:DCATalog:LENGth? [<Path>]
Returns the number of subdirectories in the current or specified directory.
Query parameters:
<Path> String parameter to specify the directory. If the directory is omit-
ted, the command queries the contents of the current directory,
to be queried with :MMEMory:CDIRectory command.
Return values:
<DirectoryCount> integer
Number of parent and subdirectories.
Usage: Query only
:MMEMory:DELete
<Filename>
Removes a file from the specified directory.
Setting parameters:
<Filename> string
String parameter to specify the name and directory of the file to
be removed.
Usage: Event
SCPI confirmed
Manual operation: See "Cut, Copy&Paste and Delete" on page 211
:MMEMory:LOAD:STATe <SavRclStateNumb>, <file_name>
Loads the specified file stored under the specified name in an internal memory.
After the file has been loaded, the instrument setting must be activated using an *RCL
command.
Setting parameters:
<SavRclStateNumb> Determines to the specific <number> to be used with the *RCL
command, e.g. *RCL 4.
<file_name> String parameter to specify the file name with extension
*.savrcltxt.
Usage: Setting only
Manual operation: See "Recall" on page 205
:MMEMory:MDIRectory <Directory>
Creates a subdirectory for mass memory storage in the specified directory. If no direc-
tory is specified, a subdirectory is created in the default directory. This command can
also be used to create a directory tree.
MMEMory subsystem