Remote control commands
R&S
®
SMB100B
501User Manual 1178.3711.02 ─ 08
Example: Configuring the reference oscillator
// Using 100 MHz external reference source
SOURce:ROSCillator:PRESet
SOURce:ROSCillator:SOURce EXT
SOURce:ROSCillator:EXTernal:RFOFf:STATe 1
SOURce:ROSCillator:EXTernal:FREQuency 100MHZ
SOURce:ROSCillator:EXTernal:SBANdwidth WIDE
// 100 MHz (loop through) and 1 GHz output
SOURce:ROSCillator:OUTPut:FREQuency:MODE LOOP
SOURce:ROSCillator:OUTPut:ALTernate:FREQuency:MODE DER1G
SOURce:ROSCillator:INTernal:ADJust:STATe 0
// Variable external reference frequency
// SOURce:ROSCillator:EXTernal:FREQuency VAR
// SOURce:ROSCillator:EXTernal:FREQuency:VARiable 100000000
// Using the internal reference frequency
SOURce:ROSCillator:SOURce INT
SOURce:ROSCillator:INTernal:TUNing:STATe 1
SOURce:ROSCillator:INTernal:TUNing:SLOPe LOW
// 10 MHz and 1 GHz output
SOURce:ROSCillator:OUTPut:FREQuency:MODE DER10M
SOURce:ROSCillator:OUTPut:ALTernate:FREQuency:MODE DER1G
// Query calibration value
CALibration:ROSCillator?
// 32767
// Set an internal source
// Activate user-defined adjustment value of 1000
SOURce:ROSCillator:SOURce INT
SOURce:ROSCillator:INTernal:ADJust:STATe 1
SOURce:ROSCillator:INTernal:ADJust:VALue 1000
// to resume calibrated state
SOURce:ROSCillator:INTernal:ADJust:VALue 0
SOURce:ROSCillator:INTernal:ADJust:STATe 0
// or
// SYSTem:FPRest
[:SOURce]:ROSCillator:PRESet...................................................................................... 502
[:SOURce]:ROSCillator:SOURce..................................................................................... 502
[:SOURce]:ROSCillator:EXTernal:RFOFf[:STATe].............................................................. 502
[:SOURce]:ROSCillator:EXTernal:FREQuency.................................................................. 502
[:SOURce]:ROSCillator:EXTernal:FREQuency:VARiable.................................................... 502
[:SOURce]:ROSCillator:EXTernal:SBANdwidth..................................................................503
[:SOURce]:ROSCillator:EXTernal:MLRange?....................................................................503
[:SOURce]:ROSCillator:EXTernal:NSBandwidth?.............................................................. 504
[:SOURce]:ROSCillator:OUTPut:FREQuency:MODE.........................................................504
[:SOURce]:ROSCillator:OUTPut:ALTernate:FREQuency:MODE..........................................504
[:SOURce]:ROSCillator[:INTernal]:ADJust:VALue.............................................................. 505
[:SOURce]:ROSCillator[:INTernal]:ADJust[:STATe].............................................................505
SOURce subsystem