Rohde & Schwarz R&S SMB100B - Page 483

Remote control commands
R&S
®
SMB100B
483User Manual 1178.3711.02 ─ 08
[:SOURce<hw>]:LIST:FREE?.......................................................................................... 484
[:SOURce<hw>]:LIST:RESet........................................................................................... 484
[:SOURce<hw>]:LIST:SELect.......................................................................................... 484
[:SOURce<hw>]:LIST:CATalog?
Queries the available list files in the specified directory.
Return values:
<Catalog> string
List of list filenames, separated by commas
Example: See Example"Create an RF list and activate the list mode"
on page 474.
Usage: Query only
Manual operation: See "List Mode Data" on page 142
[:SOURce<hw>]:LIST:DELete <Filename>
Deletes the specified list.
Setting parameters:
<Filename> string
Filename or complete file path; file extension is optional.
Example: See [:SOURce<hw>]:LIST:DELete:ALL on page 483.
Usage: Setting only
Manual operation: See "List Mode Data" on page 142
[:SOURce<hw>]:LIST:DELete:ALL
Deletes all lists in the set directory.
This command can only be executed, if:
●
No list file is selected.
●
List mode is disabled.
SOURce subsystem