List and sweep mode
R&S
®
SMB100B
143User Manual 1178.3711.02 ─ 08
2. Select "List Mode Data" > "Im-/Export".
The "Im-/Export" dialog provides the parameters for importing or exporting files with
user data in standard ASCII *.txt or *.csv file format.
The table separators and the decimal floating point numbers are customizable.
Settings
Mode........................................................................................................................... 143
ASCII File Settings......................................................................................................143
Select (ASCII) Source/Select (ASCII) Destination...................................................... 144
Select Source/Select ASCII Destination..................................................................... 144
Import / Export.............................................................................................................144
Mode
Selects import or export of a data list file. The provided parameters vary according to
the selected mode.
Remote command:
[:SOURce<hw>]:LIST:DEXChange:MODE on page 487
[:SOURce<hw>]:CORRection:DEXChange:MODE on page 453
[:SOURce<hw>]:PULM:TRAin:DEXChange:MODE on page 436
ASCII File Settings
Defines the format and the separators of the associated data file.
"Extension"
Selects *.csv or *.txt format.
"Decimal
Point"
Sets "Point" (dot) or "Comma" as the decimal separator used in the
ASCII data with floating-point numerals.
"Column Separator"
Sets the separator between the columns in an ASCII table.
Available are: "Tab", "Semicolon", "Comma" or "Space".
List mode settings
To Next Page
Loading...
