Rohde & Schwarz R&S SMB100B - Page 144

List and sweep mode
R&S
®
SMB100B
144User Manual 1178.3711.02 ─ 08
Remote command:
[:SOURce<hw>]:LIST:DEXChange:AFILe:EXTension on page 486
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:DECimal on page 486
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:COLumn on page 486
[:SOURce<hw>]:CORRection:DEXChange:AFILe:EXTension on page 452
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:DECimal
on page 453
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:COLumn
on page 452
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:EXTension on page 436
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:SEParator:DECimal
on page 437
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:SEParator:COLumn
on page 437
Select (ASCII) Source/Select (ASCII) Destination
In "Mode > Import", access the file select dialog that provides standard file handling
functions.
Where:
●
"Select ASCII Source": defines the file to be loaded (imported)
●
"Select ASCII Destination": selects the filename under that the loaded file is saved
Remote command:
[:SOURce<hw>]:LIST:DEXChange:AFILe:CATalog? on page 485
[:SOURce<hw>]:LIST:DEXChange:AFILe:SELect on page 486
[:SOURce<hw>]:CORRection:DEXChange:AFILe:CATalog? on page 452
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SELect on page 452
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:CATalog? on page 437
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:SELect on page 437
Select Source/Select ASCII Destination
In "Mode > Export", access the file select dialog that provides standard file handling
functions.
Where:
●
"Select Source": selects the file to be exported
●
"Select ASCII Destination": defines the filename and the file path for the exported
file
Remote command:
[:SOURce<hw>]:LIST:DEXChange:SELect on page 487
[:SOURce<hw>]:CORRection:DEXChange:SELect on page 453
[:SOURce<hw>]:PULM:TRAin:DEXChange:SELect on page 438
Import / Export
Imports or exports the selected data list file, depending on the current mode.
Remote command:
[:SOURce<hw>]:LIST:DEXChange:EXECute on page 485
[:SOURce<hw>]:CORRection:DEXChange:EXECute on page 453
[:SOURce<hw>]:PULM:TRAin:DEXChange:EXECute on page 438
List mode settings