Rohde & Schwarz R&S SMB100B - Page 167

Improving level performance
R&S
®
SMB100B
167User Manual 1178.3711.02 ─ 08
Remote command:
[:SOURce<hw>]:LIST:DEXChange:MODE on page 487
[:SOURce<hw>]:CORRection:DEXChange:MODE on page 453
[:SOURce<hw>]:PULM:TRAin:DEXChange:MODE on page 436
ASCII File Settings
Defines the format and the separators of the associated data file.
"Extension"
Selects *.csv or *.txt format.
"Decimal
Point"
Sets "Point" (dot) or "Comma" as the decimal separator used in the
ASCII data with floating-point numerals.
"Column Separator"
Sets the separator between the columns in an ASCII table.
Available are: "Tab", "Semicolon", "Comma" or "Space".
Remote command:
[:SOURce<hw>]:LIST:DEXChange:AFILe:EXTension on page 486
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:DECimal on page 486
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:COLumn on page 486
[:SOURce<hw>]:CORRection:DEXChange:AFILe:EXTension on page 452
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:DECimal
on page 453
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:COLumn
on page 452
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:EXTension on page 436
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:SEParator:DECimal
on page 437
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:SEParator:COLumn
on page 437
Select (ASCII) Source/Select (ASCII) Destination
In "Mode > Import", access the file select dialog that provides standard file handling
functions.
Where:
●
"Select ASCII Source": defines the file to be loaded (imported)
●
"Select ASCII Destination": selects the filename under that the loaded file is saved
Remote command:
[:SOURce<hw>]:LIST:DEXChange:AFILe:CATalog? on page 485
[:SOURce<hw>]:LIST:DEXChange:AFILe:SELect on page 486
[:SOURce<hw>]:CORRection:DEXChange:AFILe:CATalog? on page 452
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SELect on page 452
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:CATalog? on page 437
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:SELect on page 437
Select Source/Select ASCII Destination
In "Mode > Export", access the file select dialog that provides standard file handling
functions.
Where:
●
"Select Source": selects the file to be exported
User correction