File and data management
R&S
®
SMB100B
226User Manual 1178.3711.02 ─ 08
a) To change the default directory the file is saved in, select "Automatic Naming
Settings > Path" and define a path and a filename. For example, select the
default directory /var/user.
b) If necessary, disable or change some of the parameters in the "Automatic Nam-
ing Settings".
c) Close the "Hardcopy Options" dialog.
6. In the "Hardcopy" dialog, select "Save".
The instrument saves a hardcopy of the current instrument display as a *.jpg file.
The filename is automatically created.
7. To print the hardcopy, connect the instrument to a LAN and:
a) Transfer the file to a remote computer as described in Chapter 9.9, "How to
transfer files from and to the instrument", on page 215.
b) On the remote computer, navigate through the file system.
c) Print the selected file.
For more information, refer to the online help of the operating system.
Creating screenshots of current settings
To Next Page
Loading...
