Network operation and remote control
R&S
®
SMB100B
327User Manual 1178.3711.02 ─ 08
The connection to the instrument is set up and you can send remote-control com-
mands.
4. Telnet does not reflect your first entry.
Insert a command, e.g. *IDN and confirm with "Enter".
5. Observe the screen.
A response on the query confirms that the connection is working. The client dis-
plays all subsequent inputs and responses.
6. Even if the cursor is not visible on the screen, blindly enter a remote-control com-
mand. Confirm with Enter.
To establish a remote control session over LAN
To Next Page
Loading...
