Network operation and remote control
R&S
®
SMB100B
342User Manual 1178.3711.02 ─ 08
The default password is instrument.
After the connection is established, the current screen of the signal generator is
displayed and the instrument can be remotely operated from the remote computer.
Setting up the VNC connection on a Windows desktop client
1. Install the VNC viewer program component on the remote computer.
a) On the Internet, select a VNC client program and download it onto your PC.
For example the free of charge software Ultr@VNC (vncviewer.exe is avail-
able, see http://www.uvnc.com/download/index.html.
b) Execute the VNC client installation.
c) Select the VNC viewer program component and follow the installation instruc-
tions.
2. Start VNC viewer program component on the PC.
3. Select "VNC Server" and enter the IP address of the instrument.
4. To initialize the connection, select "Connect".
A dialog opens requesting the password.
5. Enter the password and confirm with "OK".
The default password is instrument.
After the connection is established, the current screen of the signal generator is
displayed and the instrument can be remotely operated from the remote computer.
To operate the instrument using VNC
To Next Page
Loading...
