Rolls-Royce Corniche - Page 281

Rolls-Royce Silver Shadow & Bentley T Series
Workshop Manual
Tool Number
Chapter N
Section N8
WORKSHOP TOOLS
Description
'Wanner' Grease Gun-Steering Linkage
Pliers-Two-way-Circlip and Snap Ring-Steering Column and wheel
Fitting Tool-Rocking Shaft Seal-Steering Box
Fitting Tool-Adjuster Plug Seal-Steering Box
Extraction and Fitting Tool-Rocking Shaft Bearing-Steering Box
Seal Protector-Adjuster Plug Assembly-Steering Box
Extraction and Fitting Tool-Adjuster Plug Needle Bearing-Steering Box
Piston Seal Compressor-Steering Box
Fitting Tool-Valve Connector Seat-Steering Box
Piston Arbor-Steering Box
Spanner-Steering Box
Extractor-Steering Wheel
Flat Pin Spanner-Steering Column (For use on non-collapsible columns only)
'C' Spanner-Steering Wheel and Column (For use on non-collapsible columns only)
Extractor-Pendulum Lever-Steering Linkage
Extractor-Ball Pin-Track Rods-Steering Linkage
Extractor-Ball Pin-Cross-beam-Steering Linkage