Samsung OfficeServ 7000 Series - Page 101

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-63
(Continued)
No Option Default Description
56 VOIP REALRBT OFF When ON, the system will connect the real path of the
outgoing trunk to the incoming VoIP trunk user instead of
providing virtual ringback tone.
58 CO-CO TM ALL OFF When ON, the system trunk call will be attached timer for
prevent the call from locking up
60 SMDR LOG ALL OFF If the hotel feature is in admin/normal station mode and cost
is ‘0’, this option allows ‘smdr record save’.
61 NO ITEM COST OFF If the hotel feature is in check-in mode, this option allows
skipping item code and cost input.
62 SMDR
AUT2ACC
OFF When ON, the AUTHORIZATION CODE will be printed in
ACCOUNT field of SMDR.
64 IPNW REAL RB OFF When ON, the system will connect the real path of the
outgoing trunk to the VoIP networking trunk user instead of
providing virtual ringback tone.
66 TRK AUTO MOH OFF When ON, an incoming trunk call is connected to MOH
automatically after the DISA ANSWR timer (MMC 503)
expires and the caller hears MOH. If the TRK AUTOMOH
DISC timer in MMC501 expires before the call is answered,
it is disconnected. (To use this feature, MMC 400 AUTO
ANSWER option must set to ON.)
67 TRSF VT KEY ON When ON, works like the VT key when the user transfers the
call to Voice Mail using the TRSF key.
68 PAIR NO RING OFF When ON, if a paired phone is busy the call camps on and a
message waiting indication is set at the busy phone and
does not ring the free paired extension.
69 DISA NO ACT OFF When ON, a DISA call will go to the station assigned in MMC
406 after the DISA NO ACT timer expires.
70 ICM AUTOHOLD OFF When ON, will allow internal calls to be put on hold
automatically when another call is taken.
73 DTMF TO S0 OFF When ON, this option allows sending DRMF to S0 extension.
74 STNHOLD PICK OFF When ON, this option allows a different extension to pick up
intercom hold.
75 AREA DELETE OFF In a Phonebook outgoing call, this option allows deleting the
area code and making the outgoing call.
76 ELCR DIALTON OFF In second LCR operation, this option allows generating a
different dial tone.
77 NET DTMF FWD OFF When ON, ext fwd is specified in SPnet when only the
station port is captured and the dial tone is heard.
83 3.1K W/O HLC OFF When ON, an incoming call is dialed when the type of ISDN
incoming call is 3.1K AUDIO type without HLC.