Samsung OfficeServ 7000 Series - Table 1.4 Trunk Related MMC List

CHAPTER 1. Overview of MMC Programming
1-10
© SAMSUNG Electronics Co., Ltd.
1.4.2.3 Trunk Related MMC
The MMC programs related to the function of the trunk are as follows:
Table 1.4 Trunk Related MMC list
MMC No. MMC Name
MMC: 400 CUSTOMER ON/OFF PER TRUNK
MMC: 401 TRUNK LINE/PBX LINE
MMC: 402 TRUNK DIAL TYPE
MMC: 403 TRUNK TOLL CLASS
MMC: 404 TRUNK NAME
MMC: 405 TRUNK CO TEL NUMBER
MMC: 406 TRUNK RING ASSIGNMENT
MMC: 407 FORCED TRUNK RELEASE
MMC: 408 ASSIGN TRUNK MOH SOURCE
MMC: 409 TRUNK STATUS READ
MMC: 410 ASSIGN DISA TRUNK
MMC: 411 ASSIGN E1 SIGNAL TYPE
MMC: 412 ASSIGN TRUNK SIGNAL
MMC: 413 VMS CALL TYPE
MMC: 414 MPD/PRS SIGNAL
MMC: 415 REPORT TRUNK ABANDON DATA
MMC: 416 ASSIGN E&M/DID RINGDOWN
MMC: 417 E1/PRI CRC4 OPTION
MMC: 418 BRI AND PRI CARD RESTART
MMC: 419 BRI OPTIONS
MMC: 420 PRI OPTIONS
MMC: 421 MSN DIGIT
MMC: 422 TRUNK COS
MMC: 423 S/T MODE
MMC: 424 BRI S0 MAPPING
MMC: 425 CID TRUNKS
MMC: 426 TRUNK GAIN CONTROL
MMC: 428 ASSIGN TRUNK/TRUNK USE
MMC: 432 SET H-TRK
MMC: 433 COST RATE
MMC: 434 CONNECTION STATUS
MMC: 436 TRUNK TMC GAIN
MMC: 437 16 TRUNK GAIN