Samsung OfficeServ 7000 Series - Change Technician Passcode

CHAPTER 2. MMC Programming
2-318
© SAMSUNG Electronics Co., Ltd.
[801] CHANGE TECHNICIAN PASSCODE
Used to change the passcode which allows access to MMC 800, Enable Technician
Program, from its current value.
CONDITIONS
The passcode is four characters long. Each character can be digits 0-9. The current or old
passcode is required for this MMC.
DEFAULT DATA
DEFAULT PASSCODE: 4321
ACTION DISPLAY
1) Press Transfer button and enter 801.
TECH. PASSCODE
NEW CODE:_
2) Enter new passcode.
TECH. PASSCODE
NEW CODE:∗∗∗∗
3) Enter new passcode again.
TECH. PASSCODE
VERIFY :∗∗∗∗
4) If passcode is correct, press Right Soft key to
continue and enter desired MMC.
TECH. PASSCODE
VERIFY :SUCCESS
If passcode is incorrect.
TECH. PASSCODE
VERIFY :FAILURE
System returns to step 2.
TECH. PASSCODE
NEW CODE:∗∗∗∗
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 800 ENABLE TECHNICIAN PROGRAM