OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-21
[110] STATION ON/OFF
Allows the system administrator to set any of the phone features listed below.
No Feature Default Description
00 AUTO HOLD OFF Automatically places an existing Trunk Line call on hold if a
CALL key, trunk key or trunk route key is pressed during that
call.
02 HEADSET USE OFF When ON, this feature disables the hook switch allowing a
headset user to answer all calls by pressing the ANS/RLS
button or SEND and END buttons.
03 HOT KEYPAD ON When ON, this feature allows you to dial directory numbers
without having to first lift the handset or press the Speaker
04 KEY TONE ON Allows you to hear a slight tone when pressing buttons on
phone.
05 PAGE REJOIN ON Allows you to hear the remaining part of page
announcements if phone becomes free during a page.
06 RING PREF. ON When OFF, requires you to press the fast flashing button to
answer a ringing call after lifting the handset.
08 AUTO CAMPON OFF When ON, phone users can allow intercom calls to camp-on
to other phones without having to press a CAMP-ON key.
09 AME BGM OFF This feature selects whether a station using Answer Machine
Emulation will hear their personal greeting or BGM while
callers are listening to the personal greeting.
A BGM source must be selected for this to work.
10 AME PASSCODE OFF When ON, station users who have AME set must enter their
station password to listen to messages being left.
11 DISP SPDNAME OFF When ON, the speed dial name associated with a speed dial
number is displayed on a phone equipped a LCD display
when using speed dial.
12 CID REVW ALL ON When ON, saves information on all calls that ring at an
extension, When OFF, saves information only on calls that
were not answered at the extension or were answered by
voice mail.
13 SECURE OHVA ON When ON, OHVA announcements will be heard on the
handset. When OFF, OHVA announcements will be heard
over the phone speaker.
To Next Page
Loading...
