Samsung OfficeServ 7000 Series - Customer Access MMC Number

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-319
[802] CUSTOMER ACCESS MMC NUMBER
Allows the System Administrator (customer) to have access to certain MMCs. For example,
it is required that the customer has access to MMC 102, Call Forward, for call forwarding
but it is not required that the customer has access to MMC 710, LCR Digit Table, for LCR
dial plans.
This MMC is for both tenants.
DEFAULT DATA
NONE
ACTION DISPLAY
1) Press Transfer button and enter 802.
Display shows:
CUST.USE MMC:1
100:STN LOCK:YES
2) Enter desired tenant number (1-2) via dial keypad.
OR
CUST.USE MMC:1
100:STN LOCK:YES
Press Volume button to make selection and press
Right Soft button to move cursor.
3) Enter desired MMC number via dial keypad.
OR
CUST.USE MMC:1
102:CALL FWD:YES
Press Volume button to make selection and press
Right Soft button to move cursor.
4) Enter 1 for YES or 0 for NO via dial keypad.
OR
CUST.USE MMC:1
102:CALL FWD:NO
Press Volume button to make selection and press Left
Soft button to return to step 3 to make additional
entries.
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
NONE