OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-215
[615] MGI GROUP
This program assigns designated MGI ports to specific services. This allows ‘grading’ of
MGI card (s) for traffic conditions. The MGI ports can be segregated into groups.
Any entries made here may be ineffective if conflicting entries exist in MMC 616.
No Type Description
0 LOCAL ITP This determines what MGI ports can be used with ITP phones across a
private IP network.
1 PUB IP ITP This determines what MGI ports can be used with ITP phones on a
public IP network.
2 VOIP NTWK This determines what MGI ports can be used for enhanced proprietary
Samsung VoIP networking between OfficeServ 7000 Series systems
across a private IP network.
3 PUB IP NTWK This determines what MGI ports can be used for enhanced proprietary
Samsung VoIP networking between OfficeServ 7000 Series systems on
a public IP network.
4 VOIP TRUNK This determines what MGI ports can be used as industry-standard
H.323 or SIP VoIP trunks for communications across a private network
5 PUB IP TRK This determines what MGI ports can be used as industry-standard
H.323 or SIP VoIP trunks for communications on a public network.
8 ITP PAGED This determines what MGI ports can be used with station page to ITP
phones across a private IP network.
The MGI ports have two selection modes: Sequential or Distributed. The members for each
selection are the actual ports on the MGI card (s).
DEFAULT DATA
LOCAL ITP: MGI1, MGI2, MGI3
PUB IP ITP: MGI2, MGI3
VOIP NTWK: MGI2, MGI3
PUB IP NTWK: MGI2, MGI3
VOIP TRUNK: MGI2, MGI3
PUB IP TRK: MGI2, MGI3
ITP PAGED: MGI1, MGI2, MGI3
To Next Page
Loading...
