Samsung OfficeServ 7000 Series - Trunk Gain Control

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-155
[426] TRUNK GAIN CONTROL
Allows loss levels to be adjusted on a per-trunk basis. There are two adjustments available
in this MMC: ‘TX’ is the transmit level adjustment of the trunk to the station. ‘RX’ is the
receive level adjustment of the station to the trunk.
OfficeServ 7200/7400
No Trunk Gain Description
0 +0.0 No adjustment
1 +1.9 Up 1.9 dB
2 -6.0 Down 6.0 dB
3 -2.5 Down 2.5 dB
Others
No Trunk Gain Description
0 +0.0 No adjustment
1 +1.0 Up 1.0 dB
2 +1.9 Up 1.9 dB
3 +2.8 Up 2.8 dB
4 -6.0 Down 6.0 dB
5 -4.1 Down 4.1 dB
6 -2.5 Down 2.5 dB
7
-1.2
Down 1.2 dB
DEFAULT DATA
TX: +0.0
RX: +0.0
ACTION DISPLAY
1) Press Transfer button and enter 426.
Display shows:
[701] TRUNK TSW
RX:+0.0 TX:+0.0
2) Enter desired trunk number (e.g., 705) via the dial
keypad.
[705] TRUNK TSW
RX:+0.0 TX:+0.0
OR
Press Volume button to make selection and press
Right Soft button to move cursor.
OR
Select all.
[ALL] TRUNK TSW
RX:+0.0 TX:+0.0