OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-253
[722] STATION KEY PROGRAMMING
Allows the customizing of programmable buttons on specific phones and add-on modules
(AOMs). For phones, buttons 1 and 2 are set as CALL buttons by default.
For AOMs, all buttons are set as DS keys by default. Features are selected by pressing the
dial keypad buttons the required number of times. For example, for OHVA, the number 6 is
pressed three times. If the BOSS key is required, 2 is pressed for the first letter B and then
the Volume button used to change the selection from BARGE to BOSS.
DIAL KEYPAD
COUNT 1 2 3 4
DIAL 2 AB BARGE CAD -
DIAL 3 DGPALM EP FAUTO -
DIAL 4 GPIK HDSET ICONF -
DIAL 5 LANREQ LANREQ LANREQ -
DIAL 6 MMPA NEW OHVA -
DIAL 7 PAGE PAGE RB SETDND
DIAL 8 TG UA VG -
DIAL 9 WAKEUP XCHIN WAKEUP WAKEUP
Programmable Button Assignments
Feature Description
AB ABSENCE
ABAND ABANDONED CALL
ABW AGENT BUSY/WRAP UP
ACC ACCOUNT
AG Answer Group (Including or excluding in a temporary answer group)
ALARM ALARM (This option may not be available in certain OfficeServ models.)
AN/RLS ANSWER/RELEASE
BARGE BARGE-IN
BILL BILL (Hotel Feature)
BLOCK OHVA BLOCK
BOOTH BOOTH (Hotel Feature)
BOSS BOSS/SECRETARY
CAD CALL ACTIVITY DISPLAY
CALL CALL BUTTON
CAG Control Answer Group (Making or deleting a temporary answer group)
CAMP STATION CAMP-ON
CANMG MESSAGE CANCEL
To Next Page
Loading...
