Samsung OfficeServ 7000 Series - Change Customer Passcode

CHAPTER 2. MMC Programming
2-50
© SAMSUNG Electronics Co., Ltd.
[201] CHANGE CUSTOMER PASSCODE
Uses to change the passcode allowing access to MMC 200, Open Customer Programming,
from its current value.
CONDITIONS
 The passcode is four digits long. Each digit can be 0-9.
 The current (old) passcode is required for this MMC.
DEFAULT DATA
PASSCODE: 1234
ACTION DISPLAY
1) Press Transfer button and enter 201.
CUST. PASSCODE
NEW CODE:_
2) Enter new passcode via dial keypad.
(maximum four digits)
CUST. PASSCODE
NEW CODE:****
3) Verify new passcode via dial keypad.
CUST. PASSCODE
VERIFY :****
Passcode verified. (go to step 4)
OR
CUST. PASSCODE
VERIFY:SUCCESS
Passcode failure. (return to step 2)
CUST. PASSCODE
VERIFY:FAILURE
4) Press Transfer button to save and exit.
OR
Press Speaker button to save and advance to next
MMC.
RELATED ITEMS
MMC 200 OPEN CUSTOMER PROGRAMMING