OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-5
[102] CALL FORWARD
Allows the system administrator to program the call forward destinations for other station
users. This MMC also allows call forward to be set after the destination has been entered.
Allows several types of call forwarding: FORWARD ALL, FORWARD NO ANSWER,
FORWARD BUSY and FORWARD DND. There is an additional option, FORWARD
BUSY/NO ANSWER that allows both of these options to be activated at the same time,
provided that destinations have been entered for both.
No Type
0 FORWARD CANCEL
1 FWD ALL
2 BUSY
3 NO ANS
4 BUSY/NO ANSWER
5 FWD DND
CONDITIONS
When ‘BUSY/NO ANSWER’ is selected, calls are forwarded to stations set in ‘BUSY’
and ‘NO ANS’. Thus, a destination number must be set for both ‘BUSY’ and ‘NO
ANS’ before you can select the ‘BUSY/NO ANSWER’ option.
If forwarding is set to ‘OFF’ in MMC 701, ASSIGN COS CONTENTS, call
forwarding cannot be set but can be cancelled. (Default: ‘OFF’)
Both ‘FORWARD’ and ‘EXT FWD’ must be set to ‘ON’ in MMC 701, ASSIGN COS
CONTENTS in order to forward a call to an external number. If only ‘FORWARD’ is
set to ‘ON’, calls can only be forwarded to internal numbers. (Default: ‘OFF’)
DEFAULT DATA
NONE
To Next Page
Loading...
