Samsung OfficeServ 7000 Series - Page 44

CHAPTER 2. MMC Programming
2-6
© SAMSUNG Electronics Co., Ltd.
ACTION DISPLAY
1) Press Transfer button and enter 102.
Display shows:
[201] FORWARD
0:FORWARD CANCEL
2) Dial station number. (e.g., 205)
OR
[205] FORWARD
0:FORWARD CANCEL
Press Volume button to select station and press Right Soft
button to move cursor.
3) Dial 0-5 to select forward type.
OR
[205] FORWARD
1:FWD ALL:NONE
Press Volume button to select forward type (e.g., 1) and
press Right Soft button to move cursor.
4) Dial destination number. (e.g., 201)
OR
[205] FORWARD
1:FWD ALL:201
Press Volume button to select destination and press
Right Soft button to move cursor.
5) Dial 1 for YES, 0 for NO.
OR
[205] FORWARD
CURRENTLY SET:YES
Press Volume button to select YES or NO and press
Right Soft button to return to step 2.
6) Press Transfer button to save and exit.
OR
Press Speaker button to save and advance to next
MMC.
RELATED ITEMS
MMC 301 ASSIGN STATION COS
MMC 501 SYSTEM TIMERS
MMC 502 STATION-WIDE TIMERS
MMC 701 ASSIGN COS CONTENTS
MMC 722 STATION KEY PROGRAMMING
MMC 723 SYSTEM KEY PROGRAMMING