OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-7
[103] SET ANSWER MODE
Allows the system administrator to change the answer mode of any phone. Each phone can
have its answer mode set to one of the following options:
No Type Description
0 RING MODE The phone will ring in one of eight custom ring patterns.
Calls are answered by pressing the ANS/RLS or SEND
button or by lifting the handset.
1 AUTO ANSWER MODE After giving a short attention tone, the phone will
automatically answer calls on the speakerphone. When a
Trunk line is transferred to a phone in Auto Answer, the
screened portion of the call will be Auto Answered, but the
phone will ring when the transfer is complete if you have not
pressed the ANS/RLS or SEND button or lifted the handset.
2 VOICE ANNOUNCE The phone will not ring. After a short attention tone, callers
can make an announcement but the ANS/RLS or SEND
button or handset must be used to answer calls
.
To answer the C.O. call automatically
To answer the C.O. call automatically, set ‘ON’ the option ‘AUTO ANS CO’ in
MMC 110.
DEFAULT DATA
ALL PHONES: RING
To Next Page
Loading...
