OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-39
[120] LARGE LCD OPTIONS
Allows the system administrator to set any of the following options for large LCD phones.
No Option Description
0 IDLE DISPLAY Sets whether to display ‘CALENDAR’ or ‘INFORMATION’ on LCD
when idle.
1 DS KEY DISPLAY Sets whether to display extension numbers or names for ‘DS’
keys on LCD.
2 DIAL MODE
Sets dial mode to ENBLOCK or OVERLAP.
3 CONV DISP
SOFT MENU FIRST
If selected, features assigned to keys are displayed when
SCREEN key is pressed while on a call.
AOM KEY FIRST
If selected, extensions assigned to keys are displayed when
SCREEN key is pressed while on a call.
4 CALENDAR
Sets whether to display PREVIOUS screen or CALENDAR
screen on LCD when idle.
5 AOM CURSOR
Sets cursor position on AOM menu screen. (01~99, PREV
6 VIDEO MODE Sets the image start mode of a VIDEO IP phone.
In AUTO START, the image screen is displayed automatically
when a call is connected to a Video IP phone. In MANUAL Start,
the VIDEO button of a VIDEO IP phone is used for the selection
of image display. (AUTO START / MANUAL START)
This option only supports VIDEO IP phones.
7 RING VIDEO Determines whether to display an image or not while ringing after
a call is connected to a VIDEO IP phone (DISABLE/ENABLE).
This option only supports VIDEO IP phones.
DEFAULT DATA
IDLE DISPLAY: CALENDAR
DS KEY DISPLAY: TEL NUMBER
DIAL MODE: ENBLOCK
To Next Page
Loading...
