Samsung OfficeServ 7000 Series - Trunk Ring Assignment

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-121
[406] TRUNK RING ASSIGNMENT
Enables ringing to a specific station or to a group of stations when incoming calls are
received. This MMC controls ring plan destinations for ring down trunks. If the ring plan
destinations are not entered, the default ring plan is ring plan 1.
DEFAULT DATA
ALL TRUNKS RING DEFAULT OPERATOR GROUP
ACTION DISPLAY
1) Press Transfer button and enter 406.
Display shows:
[701] TRK RING
1:500 2:500
2) Dial trunk number. (e.g., 704)
OR
[704] TRK RING
1:500 2:500
Use Volume button to scroll through trunk numbers
and press Right Soft button to move the cursor.
OR
Select all.
[All] TRK RING
1:500 2:500
3) Dial ring plan number or press Right Soft button to
move to the next step.
[704] TRK RING
1:500 2:500
4) Dial station number or station group number.
(e.g., 205)
[704] TRK RING
1:205 2:500
OR
Press Volume button to make selection and
press Right Soft button to move cursor to the next ring
plan destination and repeat step 4.
[704] TRK RING
1:205 2:501
OR
Press Left Soft button to return to step 3.
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 202 CHANGE FEATURE PASSCODES
MMC 507 ASSIGN RING PLAN TIME
MMC 601 ASSIGN STATION GROUP