Samsung OfficeServ 7000 Series - Irm Dsp Mode Select

CHAPTER 2. MMC Programming
2-438
© SAMSUNG Electronics Co., Ltd.
[867] IRM DSP MODE SELECT
This MMC can assign IRM CH mode. IRM D-Board Channels can be operated one mode
of DTMFR, R2MFC, CID.
If there is not IRM Board, displays ‘NO IRM’.
This option may not be available in certain OfficeServ models.
Type Option
OfficeServ7400 C:1-LOC:1-CH:01
DTMFR (DTMFR)
CONDITION
IRM board must be equiped in LP40.
DEFAULT DATA
CH01-16:DTMFR
ACTION DISPLAY
1)
Press Transfer button and enter 867.
Display shows:
C:1-LOC:1-CH:01
DTMFR  DTMFR
2) Dial the cabinet number. (1-3)
OR
C:1-LOC:1-CH:01
DTMFR  DTMFR
Press Volume button to select and press Right Soft
button to move cursor.
3) Dial the LOC number. (1-2)
OR
C:1-LOC:1-CH:01
DTMFR  DTMFR
Press Volume button to select and press Right Soft
button to move cursor.
4) Dial the DSP number. (1-2)
OR
C:1-LOC:1-CH:01
DTMFR  DTMFR
Press Volume button to select and press Right Soft
button to move cursor.