Samsung OfficeServ 7000 Series - Copy Cos Contents

CHAPTER 2. MMC Programming
2-218
© SAMSUNG Electronics Co., Ltd.
[700] COPY COS CONTENTS
This MMC allows the technician to duplicate classes of service.
DEFAULT DATA
NONE
PROGRAM BUTTONS
‘F’ KEY Used to advance to MMC 701
ACTION DISPLAY
1) Press Transfer button and enter 700.
Display shows:
COPY COS ITEMS
COS01  COS01
2) Dial selected COS to copy. (e.g., 05)
OR
COPY COS ITEMS
COS05  COS01
Press Volume button to select COS and press.
Right Soft button to move cursor and advance to next
step.
3) Dial target COS. (e.g., 06)
OR
COPY COS ITEMS
COS05  COS06
Press Volume button to select COS and press Right
Soft button to move cursor back to step 2.
4)
Press F key to advance MMC 701 and press Right
Soft to advance cursor.
COS CONTENTS (06)
TOLL LEVEL:A
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 701 ASSIGN COS CONTENTS