Samsung OfficeServ 7000 Series - Gk Options; H.323 Gk Options

CHAPTER 2. MMC Programming
2-376
© SAMSUNG Electronics Co., Ltd.
[836] H.323 GK OPTIONS
Provides a means to set the H.323 gatekeeper parameters for an optional, external industry-
standard H.323 network gatekeeper, using Registration, Admissions and Status (RAS). The
settings apply system wide.
MMC [836]
This program may not be available in certain OfficeServ models.
When changing IP
When changing any IP address/value, listed below, three digits must be input for
each (octet) field. Example 192.168.1.10 input must be: 192 168 001 010
No Parameter Description Default
00 GK CONNECTION This enables the H.323 call to connect to a
gatekeeper.
DISABLE
01 GK REGISTERED Display the status of registration to the Gatekeeper. NO
02 GK ROUTING This enables routing of calls through a gatekeeper. DISABLE
03 GK RAS TYPE Select if AUTO or MANUAL, depending on your
gatekeeper’s capabilities.
AUTO
04 GK IP ADDRESS This is the gatekeeper’s IP address. 0.0.0.0
05 ALTER GK IP ADDR This provides an alternate gatekeeper address. 0.0.0.0
06 GK NAME This is the alphanumeric identifier of the gatekeeper.
(Up to 16 characters.)
‘Gatekeeper’
07 H.323 ID This is the H.323 identifier used by the MGI when
registering with the gatekeeper. (Up to 32
characters.)
‘OfficeServ’
08 E.164 ID This is the E.164 identifier used by the H.323 trunk
when registering with the gatekeeper. (Up to 16
digits long.)
1234
09 GK KEEP ALIVE This is the timer that the MGI uses to acknowledge
the presence of the gatekeeper. The range is
000~999 seconds.
0 SEC
10 GK DOWN ROUTE This provides an alternate route if the primary
gatekeeper is down. Selections are PSTN or ALTER
GK.
PSTN
11 URQ REASON
MODE
Select ON or OFF for use of Un-register Request
RAS (URQ) messages.
ON