CHAPTER 2. MMC Programming
2-236
© SAMSUNG Electronics Co., Ltd.
[710] LCR DIGIT TABLE
The LCR DIGIT TABLE contains all numerical digits for the completion of outgoing call
placement. This table works in conjunction with LCR ROUTE TABLE, LCR TIME
TABLE and LCR MODIFY DIGITS TABLE. There is a maximum 2000 entries with a
digit string length of 10 numerical digits. This system automatically maintains entered digit
strings in numerical order. The characters ‘* ‘ and ‘#’ are also accepted for use with feature
codes.
DEFAULT DATA
NONE
ACTION DISPLAY
1) Press Transfer button and enter 710.
Display shows:
LCR DIGIT (0001)
DIGIT:
2) Dial LCR entry. (e.g., 0005)
OR
LCR DIGIT (0005)
DIGIT:_
Press Volume button to select entry and press Right
Soft button to move cursor.
3) Enter LCR digit string via the dial keypad and press
Right Soft button.
LCR DIGIT (0005)
DIGIT:305426
OR
Press Left Soft button to return to step 1.
4) Enter digit length. (max. 31)
Cursor will move to RT. (route selection)
LCR DIGIT (0005)
LENGTH:10 RT:01
5) Enter RT (01-32)
Valid entry will return you to step 1.
LCR DIGIT (0005)
LENGTH:10 RT:01
6) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 712 LCR ROUTE TABLE
To Next Page
Loading...
