Samsung OfficeServ 7000 Series - Station;Trunk Use Group

CHAPTER 2. MMC Programming
2-214
© SAMSUNG Electronics Co., Ltd.
[614] STATION/TRUNK USE GROUP
This program allows you to assign stations to station use groups and trunks to trunk use
groups. This is useful if you want to restrict calling between stations, outgoing calls
through a trunk lines, or call answering.
DEFAULT DATA
type Range
Staton Use Group OfficeServ 7200 MCP/7200 MP20/7400 1~300
Others 1~100
Trunk Use Group OfficeServ 7200 MCP/7200 MP20/7400 301~500
Others 101~200
ACTION DISPLAY
1) Press Transfer button and enter 614.
Display shows first station:
STATION GROUP
201 :001
2) Enter 0 if you want to set a station group.
Enter 1 if user want to set a trunk group.
TRUNK GROUP
701 :301
OR
Press Volume button to make selection and press
Right Soft button to advance cursor.
3) Enter number of station/trunk.
OR
TRUNK GROUP
702 :301
Press Volume button to make selection and press
Right Soft button to advance cursor.
4) Enter the number of the use group.
OR
TRUNK GROUP
702 :302
Press Volume button to make selection and press
Right Soft button to advance cursor.
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 304 ASSIGN EXTENSION/TRUNK USE
MMC 317 ASSIGN STATION/STATION USE
MMC 428 ASSIGN TRUNK/TRUNK USE